Product Parameters
| IMTE No. | Part No. | Ø D1 | Ø D2 | L1 | L2 |
| IMT200622 | BC16-ER11M-120 | 16 | 17.5 | 120 | 146.5 |
| IMT200623 | BC16-ER16M-120 | 23.5 | 120 | 160 | |
| IMT200624 | BC20-ER16M-100 | 20 | 23.5 | 100 | 140 |
| IMT200625 | BC20-ER16M-120 | 23.5 | 120 | 160 | |
| IMT200626 | BC20-ER16M-150 | 23.5 | 150 | 190 | |
| IMT200627 | BC20-ER20M-100 | 28 | 100 | 145.5 | |
| IMT200628 | BC20-ER20M-120 | 28 | 120 | 165.5 | |
| IMT200629 | BC20-ER20M-150 | 28 | 150 | 195.5 | |
| IMT200630 | BC20-ER20M-170 * | 28 | 170 | 215.5 | |
| IMT200631 | BC25-ER16M-120 | 25 | 23.5 | 120 | 160 |
| IMT200632 | BC25-ER16M-170 * | 23.5 | 170 | 210 | |
| IMT200633 | BC25-ER20M-120 | 28 | 120 | 162 | |
| IMT200634 | BC25-ER20M-170 * | 28 | 170 | 212 | |
| IMT200635 | BC25-ER25M-120 | 35 | 120 | 172 | |
| IMT200636 | BC25-ER25M-170 * | 35 | 170 | 222 | |
| IMT200637 | BC25-ER25M-210 | 35 | 210 | 262 |
* Please note that the above collet chucks more than 150 mm long can’t be used for traverse milling as it may cause vibration.
The above products do not contain spanners and/or collets. Please order them additionally, if necessary