Product Parameters
| Run-out: | 0.003 mm |
| Material: | Alloy Steel |
| R.P.M.: | Max. 6000 RPM |
| Torque: | Max. 6 Nm |
| Drilling: | Max. 4 mm |
| Tapping: | Max. M3 |
| Gear Ratio: | 1 : 1.389 |
| Spindle Type: | BT; SK(ISO); CAT; HSK |
| Standard Accessory: | T-type Wrench; L-type Wrench |
| Output Rotation: | Same as Input Rotation |
| IMTE No. | Part No. | A | B | C | D | E | F | G | H | J | K | L |
| IMT202463 | AHL-BT40-C9.65 | 224 | 12.5 | 95 | 64 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4)* | 20 | 65 |
| IMT202464 | AHL-BT50-C9.80 | 231 | 80 | |||||||||
| IMT202465 | AHL-BT50-C9.110 | 231 | 110 | |||||||||
| IMT202466 | AHL-SK40-C9.65 | 229.5 | 12.5 | 95 | 64 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
| IMT202467 | AHL-SK50-C9.80 | 231 | 80 | |||||||||
| IMT202468 | AHL-SK50-C9.110 | 231 | 110 | |||||||||
| IMT202469 | AHL-CAT40-C9.65 | 229.5 | 12.5 | 95 | 64 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
| IMT202470 | AHL-CAT50-C9.80 | 231 | 80 | |||||||||
| IMT202471 | AHL-CAT50-C9.110 | 231 | 110 | |||||||||
| IMT202472 | AHL-HSK63-C9.65 | 235.5 | 12.5 | 95 | 64 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
* These Angle Heads require the adoption of special ADC collets
Unless otherwise specified, all dimensions are in millimeters