Product Parameters
| Run-out: | 0.003 mm |
| Material: | Alloy Steel |
| R.P.M.: | Max. 6000 RPM |
| Torque: | Max. 6 Nm |
| Drilling: | Max. 4 mm |
| Tapping: | Max. M3 |
| Gear Ratio: | 1 : 1.389 |
| Spindle Type: | BT; SK(ISO); CAT; HSK |
| Standard Accessory: | T-type Wrench; L-type Wrench |
| Output Rotation: | Reverse to Input Rotation |
| IMTE No. | Part No. | A | B | C | D | E | F | G | H | J | K | L |
| IMT202473 | AHL-BT40-C10.65 | 278 | 12.5 | 95 | 118 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4)* | 20 | 65 |
| IMT202474 | AHL-BT50-C10.80 | 285 | 80 | |||||||||
| IMT202475 | AHL-BT50-C10.110 | 285 | 110 | |||||||||
| IMT202476 | AHL-SK40-C10.65 | 286.5 | 12.5 | 95 | 118 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
| IMT202477 | AHL-SK50-C10.80 | 285 | 80 | |||||||||
| IMT202478 | AHL-SK50-C10.110 | 285 | 110 | |||||||||
| IMT202479 | AHL-CAT40-C10.65 | 286.5 | 12.5 | 95 | 118 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
| IMT202480 | AHL-CAT50-C10.80 | 285 | 80 | |||||||||
| IMT202481 | AHL-CAT50-C10.110 | 285 | 110 | |||||||||
| IMT202482 | AHL-HSK63-C10.65 | 292.5 | 12.5 | 95 | 118 | 21 | 73.5 | 31 | 25 | 2~4 (ADC4) | 20 | 65 |
* These Angle Heads require the adoption of special ADC collets
Unless otherwise specified, all dimensions are in millimeters